Tips On How To Move Data From One Xbox 360 Hard DriveTo Another
|
| Xbox Category RSS Feed - Subscribe to the feed here |
|
|
This article describes how to transfer the hard drive for xbox 360 using the Drive Transfer Kit to transfer all content from one hard drive to another
You will need :
An Xbox 360 console
Two Xbox 360 hard drives
Data transfer cable (included with the Xbox 360 Hard Drive Transfer Kit)
This could be included when you buy the Xbox 360 Hard Drive
Data transfer software program (incorporated with the Xbox 360 Hard Drive Transfer Kit)
The Xbox 360 Hard Drive Transfer Kit transfers all content to another hard drive. Read the users guide which you get with the Xbox 360 Hard Drive Transfer Kit.
You are able to transfer all content from one Xbox 360 hard drive (this is known as the “source”) to another Xbox 360 hard drive (this is known as the “destination”). The data from the source hard drive overwrites the content on the destination hard drive.
Of course content can only be moved to another hard drive so long as the destination hard drive is the same size or bigger than the source hard drive
When the transfer is finished, the data on the destination hard drive is going to be replaced with the content from the source hard drive. This content will include your saved games and Xbox LIVE downloads. After the transfer is complete, the content on the source hard disk is deleted.
Movie rentals
Films you have rented on the source hard drive will not be available after the move. Ensure that you watch all Xbox LIVE Marketplace movie rentals before you use the Hard Drive Transfer Kit.
Using the Hard Drive Transfer Kit
Warning with any transfer, there is a small risk that some or all of your content might be lost during the process.
Only one hard drive can be connected to your Xbox 360 console at a time. The transfer cable cannot be used to connect multiple hard drives to your console at the same time.
To transfer all content from one hard drive to another
Switch off your Xbox 360 console with your current hard drive (the “source” drive) attached.
Disconnect all accessories from the console.
Turn on the console. Connect a controller and turn it on. You will need to use a controller during the content transfer.
Connect the transfer cable to the hard drive that you are moving content to (the “destination” hard drive).
Important The transfer cable connects to the destination hard drive in only one direction. Don’t force the connector on.
Connect the transfer cable to the destination hard drive in the direction shown below.
Plug the other end of the transfer cable into the USB port on the back of your Xbox 360 console.
Important Do not plug the transfer cable into a USB port on the front of your Xbox 360 console.
Load the Xbox 360 Hard Drive Transfer Disc (included with the transfer kit) into your Xbox 360 console. Instructions will appear on the screen
The transfer process can take more than 60 minutes, depending on the amount of content on the source hard drive.
The Xbox Dashboard is not available during the content transfer.
If the transfer is interrupted for any reason, your data will remain on the source hard drive. You are able to restart the transfer process anytime until the transfer is finished.
To remove your Xbox 360 hard drive
1.Switch off your Xbox 360 console.
2.Find the hard drive on the top of your console (or on the left side, depending on how your console is oriented).
3.Press the release button on the hard drive.
4.Lift the hard drive away from the console.
To attach your hard drive
1.Turn off your Xbox 360 console.
2.Position the back of the hard drive against the back of the hard drive bay.
3.Push the front end of the hard drive down until it clicks in place.
Note If your console did not previously have a hard drive, you will need to remove the hard drive bay cover before attaching a hard drive.
If you are seriously looking at an XBOX 360 hard drive visit Steve P Lobston


Email to a Friend
Print This Article

